Researchers develop a new ultrafast insulin

Researchers develop a new ultrafast insulin
Illustration depicting how fast different forms of insulin absorb in the bloodstream, and how the polymer developed by these researchers helps stabilize ultrafast-absorbing insulin in the vial. Credit: Joseph Mann and Caitlin Maikawa

Researchers at Stanford University are developing a new insulin formulation that begins to take effect almost immediately upon injection, potentially working four times as fast as current commercial fast-acting insulin formulations.

The researchers focused on so-called monomeric , which has a molecular structure that, according to theory, should allow it to act faster than other forms of insulin. The catch is that monomeric insulin is too unstable for practical use. So, in order to realize the ultrafast potential of this insulin, the researchers relied on some materials science magic.

"The themselves are fine, so we wanted to develop a 'magic fairy dust' that you add into a vial that would help to fix the stability problem," said Eric Appel, assistant professor of materials science and engineering at Stanford. "People often focus on the therapeutic agents in a but, by focusing only on the performance additives—parts that were once referred to as 'inactive ingredients' - we can achieve really big advancements in the overall efficacy of the drug."

After screening and testing a large library of additive polymers, the researchers found one that could stabilize monomeric insulin for more than 24 hours in stressed conditions. (By comparison, commercial fast-acting insulin stays stable for six to ten hours under the same conditions.) The researchers then confirmed the ultrafast action of their formulation in diabetic pigs. Their results were published July 1 in Science Translational Medicine. Now, the researchers are conducting additional tests in hopes of qualifying for clinical trials in humans.

One step back, two steps forward

Current commercial formulations of insulin contain a mix of three forms: monomers, dimers and hexamers. Scientists have assumed monomers would be the most readily useful in the body but, within vials, the insulin molecules are drawn to the surface of the liquid where they aggregate and become inactive. (Hexamers are more stable in the vial but take longer to work in the body because they first have to break down into monomers to become active.) This is where the "magic fairy dust"—a custom polymer that is attracted to the air/water interface—comes in.

[Credit: Professor Eric Appel, Assistant Professor of Materials Science & Engineering, Stanford University; Joseph Mann, PhD Candidate in Materials Science & Engineering, Stanford University; Caitlin Maikawa, PhD Candidate in Bioengineering, Stanford University

"We focused on polymers that would preferentially go to that interface and act as a barrier between any of the insulin molecules trying to gather there," said Joseph Mann, a graduate student in the Appel lab and co-lead author of the paper. Crucially, the polymer can do this without interacting with the insulin molecules themselves, allowing the drug to take effect unimpeded.

Finding just the right polymer with the desired properties was a long process that involved a three-week trip to Australia, where a fast-moving robot created approximately 1500 preliminary candidates. This was followed by processing and testing individually by hand at Stanford to identify polymers that successfully exhibited the desired barrier behavior. The first 100 candidates didn't stabilize commercial insulin in tests but the researchers pressed on. They found their magic polymer only weeks before they were scheduled to run experiments with diabetic pigs.

"It felt like there was nothing happening and then all of the sudden there was this bright moment ... and a deadline a couple of months away," said Mann. "The moment we got an encouraging result, we had to hit the ground running."

Researchers develop a new ultrafast insulin
The ultrafast-absorbing insulin is based on simpler insulin monomer molecules, which are absorbed far faster than the more complex dimers and hexamers used in commercial rapid-acting insulin analogs. Credit: J.L. Mann et al., Science Translational Medicine (2020)

In commercial insulin—which typically remains stable for about 10 hours in accelerated aging tests—the polymer drastically increased the duration of stability for upwards of a month. The next step was to see how the polymer affected monomeric insulin, which on its own aggregates in 1-2 hours. It was another welcome victory when the researchers confirmed that their formulation could remain stable for over 24 hours under stress.

"In terms of stability, we took a big step backward by making the insulin monomeric. Then, by adding our polymer, we met more than double the stability of the current commercial standard," said Caitlin Maikawa, a graduate student in the Appel lab and co-lead author of the paper.

With a seed grant from the Stanford Diabetes Research Center and the Stanford Maternal and Child Health Research Institute, the researchers were able to evaluate their new monomeric insulin formulation in diabetic pigs—the most advanced non-human animal model—and found that their insulin reached 90 percent of its peak activity within five minutes after the insulin injection. For comparison, the commercial fast-acting insulin began showing significant activity only after 10 minutes. Furthermore, the monomeric insulin activity peaked at about 10 minutes while the commercial insulin required 25 minutes. In humans, this difference could translate to a four-fold decrease in the time insulin takes to reach peak activity.

"When I ran the blood tests and started plotting the data, I almost couldn't believe how good it looked," said Maikawa.

"It's really unprecedented," said Appel, who is senior author of the paper. "This has been a major target for many big pharmaceutical companies for decades."

The monomeric insulin also finished its action sooner. Both beginning and ending activity sooner makes it easier for people to use insulin in coordination with mealtime glucose levels to appropriately manage their blood sugar levels.

A multifaceted success

The researchers plan to apply to the Food and Drug Administration for approval to test their insulin formulation in with human participants (although no trials are planned yet and they are not seeking participants at this time). They are also considering other uses for their , given how significantly it increased stability in commercial insulin.

Because their insulin formulation activates so quickly—and, therefore, more like insulin in a person without diabetes—the researchers are excited by the possibility that it could aid the development of an artificial pancreas device that functions without the need for patient intervention at mealtimes.

Additional Stanford co-authors include former visiting scholar Anton Smith (from Aarhus University in Denmark); graduate students Abigail Grosskopf, Gillie Roth, Catherine Meis, Emily Gale, Celine Liong, Doreen Chan, Lyndsay Stapleton and Anthony Yu; clinical veterinarian Sam Baker; and postdoctoral fellow Santiago Correa. Researchers from CSIRO Manufacturing in Australia are also co-authors. Appel is also a member of Stanford Bio-X, the Cardiovascular Institute, the Stanford Maternal and Child Research Institute and a faculty fellow at Stanford ChEM-H.


Explore further

Experimental two-in-one shot may give diabetics a better way to control their blood sugar

More information: J.L. Mann el al., "An ultrafast insulin formulation enabled by high-throughput screening of engineered polymeric excipients," Science Translational Medicine (2020). stm.sciencemag.org/lookup/doi/ … scitranslmed.aba6676
Journal information: Science Translational Medicine

Citation: Researchers develop a new ultrafast insulin (2020, July 1) retrieved 11 August 2020 from https://medicalxpress.com/news/2020-07-ultrafast-insulin.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.
250 shares

Feedback to editors

User comments